Re: [Maine-birds] Safety back-ups for camera straps/connectors

Oh, I see.  In which case a second tether from the buckle hasp through the threaded u-bolt is needed.  Thanks much for the clarification.  Did the stem for the carabiner pull out, or did the carabiner come off the stem itself?  Just curious.

By the way, Perlon in 3 or 4 mm sizes is available by the length in stores that sell climbing equipment.

On Sat, Nov 5, 2016 at 5:19 PM, Kenneth Janes <janes.ken@gmail.com> wrote:

In my case, the post on the end of the carabiner wore down and came right out of the buckle, sending camera and lens to the ground.  Your Perlon rope safety cord, the way you show in the picture, would not prevent dropping the camera in that situation unless the rope went through the buckle or around the strap.  It does cover the problem of the bolt coming out of the camera which is the most common cause of failure I'm told.  The folks at Black Rapid have promised to send me a new strap with a tether system they have developed so it will be interesting to see what they have come up with.  Thanks for your suggestions.

Ken

On Nov 5, 2016, at 4:08 PM, Bruce Bartrug <bbartrug@gmail.com> wrote:

I use L-brackets on my cameras and very much like to have them lie relatively "flat" when on a shoulder strap.  So I bought a small screwclamp for Arca-Swiss tripod mounts from RRS (http://www.reallyrightstuff.com/B2-FABN-38mm-Screw-knob-clamp-with-strap-bossesz) and mounted same on the vertical bar of the L-Bracket.  I used a Black Rapid u-bolt and locking carabiner as the connection to a shoulder strap (which I made myself.)   Here's a photo:  https://flic.kr/p/MXqCNe.  You can see how the camera would lay close to my hip, out of the way of binocs and errant tree stumps.

Also note the safety cord, which is a short piece of 5mm Perlon, a material used in climbing ropes.  All my cameras have such a loop and I use them with regular straps as well .. never know, and they're much stronger and longer-lasting than shoe laces :).

If you're wondering what I do when I want to use the vertical camera orientation, the RRS screwclamp is easy to remove, even with gloves, and slides out of the way.  The Perlon loop keeps it handy for replacement.  A photo of same:  https://flic.kr/p/NsY3i1.

This arrangement, of course, would only be appropriate for those Arca-Swiss tripod heads, but hopefully some suggestions, especially the Perlon loop, would be applicable to your own camera strap arrangements.

Cheers,

BAB

--

Bruce Bartrug
Nobleboro, Maine, USA
bbartrug@gmail.com
www.brucebartrug.com

•The world is a dangerous place, not because of those who do evil, but because of those who look on and do nothing.  - Albert Einstein

•In the end, we will remember not the words of our enemies, but the silence of our friends. -Martin Luther King

--
Maine birds mailing list
maine-birds@googlegroups.com
http://groups.google.com/group/maine-birds
https://sites.google.com/site/birding207
---
You received this message because you are subscribed to the Google Groups "Maine birds" group.
To unsubscribe from this group and stop receiving emails from it, send an email to maine-birds+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Bruce Bartrug
Nobleboro, Maine, USA
bbartrug@gmail.com
www.brucebartrug.com

•The world is a dangerous place, not because of those who do evil, but because of those who look on and do nothing.  - Albert Einstein

•In the end, we will remember not the words of our enemies, but the silence of our friends. -Martin Luther King

--
Maine birds mailing list
maine-birds@googlegroups.com
http://groups.google.com/group/maine-birds
https://sites.google.com/site/birding207
---
You received this message because you are subscribed to the Google Groups "Maine birds" group.
To unsubscribe from this group and stop receiving emails from it, send an email to maine-birds+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.